+- Forums (https://eu-forums.com)
+-- Forum: World Wide Talk (https://eu-forums.com/forum-12.html)
+--- Forum: Science and Technology Forum (https://eu-forums.com/forum-8.html)
+--- Thread: Steps For Canon MG 2520 Printer Setup (/thread-59687.html)
Steps For Canon MG 2520 Printer Setup - camilar - 01-12-2021
- Firstly you need to make sure that the printer is sealed well with the manufacturer’s seal for the canon pixma mg 2520 printer setup.
- The next step is you need to start the process by unboxing the printer as you need to remove the packings and tapes from it.
- Now you need to place the primer on the flat base and then switch on the printer by connecting to the socket.
- The next step is you need to insert the sheets in the printer’s tray and fill the cartridge as well.
- Lastly, now you are all done with the process of canon pixma mg 2520 printer setup by running the print test if all is good then you are all done now.
RE: Steps For Canon MG 2520 Printer Setup - Akshay_M - 01-12-2021
Check that your canon pixma mg 2520 is well sealed as it is important to have the seal as it is the mark that the product is genuine.
Now after the above step now unbox the canon printer and take out the tapes from your canon mg 2520 printer.
Place the printer on the flat base carefully also take out the accessories from the printer for the process of how to setup canon pixma mg2520.
Now you need to plug the printer to the power switch and the other to the printer and connect it to your printer.
The next is that now once you switch on the printer in the input tray put the sheet for printing for the process.
Regards,
Akshay
Technical Consultant
Apps4Rent | CloudDesktopOnline | O365CloudExperts