Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Principle of pumping liquid by water ring pump
#1
Principle of pumping liquid by water ring pump

When pumping liquid, the process of suction is the same as that of gas. Because the speed of the sickle increases on the left side of the pump.

According to Bernoulli's equation, when the speed increases, the pressure will decrease. When the liquid continues to move forward and flows to connect with the pressure outlet, the pressure will suddenly increase. The result of pressure increase makes the liquid passing through the pressure outlet be restrained and slow down. The sudden increase of pressure and deceleration will bring huge hydraulic loss. Therefore, the power of water ring pump in pumping liquid is very low (compared with pumping air) The power should not exceed 15 ~ 20%, because of the huge hydraulic loss and the "water conveyor effect" (when the liquid flows to the pressure outlet area, the liquid flows from the place with large radius to the place with small radius, and the liquid transfers its own energy to the impeller, just like the water conveyor), the lift is much smaller in practice. The head of water ring pump is smaller than that of centrifugal pump of the same scale.

Water ring vacuum pump

Rotary Vane Vacuum Pump

Dry Scroll Vacuum Pump
Reply



Possibly Related Threads…
Thread Author Replies Views Last Post
  High vacuum system pumping yanyan 0 1,582 10-14-2020, 08:25 AM
Last Post: yanyan
  Water ring vacuum pump in chemical fertilizer operation yanyan 0 1,592 10-14-2020, 08:23 AM
Last Post: yanyan
  Principle of dry vacuum system in steel production yanyan 0 1,648 09-03-2020, 07:56 AM
Last Post: yanyan
  Costs At The Pump Are A Gasly Problem mehedibd208 0 1,530 08-20-2020, 09:20 AM
Last Post: mehedibd208



Users browsing this thread:
1 Guest(s)

Powered By MyBB, © 2002-2024 Melroy van den Berg.