Steps For HP Printer Setup on Windows

[camilar]

• The first step is to make sure that your hp printer is sealed well before unboxing for the setup process.
  

• The next step is you need to remove off all the tapes and pack for the process of the hp printer setup.
  

• Now you need to place your hp printer on the flat surface for the process of hp printer setup windows as explained above.
  

• The next step is you need to plug your hp printer into the power socket for the next steps.
  

• Now you need to insert the paper in the printer for the hp printer setup windows and insert the cartridges for the next process.
  

• The last step is you need to run the print test if all goes good then you are done with the setup now.
  

[Akshay_M]

Step 1: Prepare for printer setup
Check the requirements and delete previous versions of Windows installed printers, USB connection configuration, and driver installation.

Confirm the following requirements and items before you begin:

The printer is turned on and in good condition.

Get a USB cable less than 3 feet 9 meters long.

There is an available USB port on your computer: If you connect from a USB hub or docking station, the working printer may not receive enough power.

If you have connected the USB cable to your computer before installing the HP driver, follow these steps to ensure a successful configuration to remove the printer from the installed device. Alternatively, go to the next step to install the driver.

Disconnect the printer's USB cable from your computer. Do not reconnect the cable until prompted during the driver installation step.

Search for "devices" in Windows, and then click Results and Printers in the control panel settings.

Right-click the printer model icon, and then click Remove Device. If there are several icons for the printer, remove them all.

Remove Printer Devices and Printers

Close the Devices and Printers window and continue to the next step.

Step 2: Install the driver and configure the connection
Download and install the best available printer driver to complete your USB connection.

Installing HP Printer on Windows by USB Cable